We are highly recognized Importer and Trader of Asphalt & Bitumen products.

These highly viscous petroleum liquids are procured from leading manufactures of the industry. These are best in quality and are highly useful.

 

They are well verified on several aspects and provided in proper secure packing. We provide our products to various sectors at the best market rates.

We Are Committed

We anticipate Bitumen procuring needs of our customers and make all efforts to exceed our customer’s expectation of premium quality, competitive pricing, shortest delivery time, individual and company accountability, best-in-class service and support, and financial stability. 

No compromise on commitment to Quality

Quality management system certificate
(ISO 9001)

Environment management system certificate
(ISO 14001)

Lab quality management system
(ISO/ 17025)

Europe standard certificate
(CE certificate)

 

Types and Grades of Bitumen we offer

 

Bitumen – Penetration Grades

Test METHOD  10-20 40-50 60-70 85-100 120-150
Specific Gravity @25°C ASTMD-70 1.01-1.06 1.01-1.06 1.01-1.06 1.01-1.06 1.01-1.06
Penetration @25°C ASTMD-5 10-20 40-50 60-70 85-100 120-150
Softening Point ASTMD-36 60-70 49 min 46 min 42 min 38 min
Ductility at 25°C ASTMD-113 5min 100 100 100 100
Loss on HEATING% ASTMD-6 0.2max 0.2max 0.2 max 0.5 max 0.5 max
Drop in pen After HEATING% ASTM D-6&D-5 20max 20max 20 max 20 max 20 max
Flash point ASTM D-92 250 min 230 min 230 min 230 min 230 min
Solubility in TCE ASTM D-2042 99 min 99 min 99 min 99 min 99 min
Spot TEST A.A.S.H.T.O.T.102 Negative Negative Negative Negative Negative

Bitumen – Viscosity Grades

TEST BIS METHOD   SPECIFICATION
VG10 VG20 VG30 VG40
Absolute Viscosity at 60°C,Poises ASTMD-2171 Min.800 Min.1600 Min.2400 Min.3200
Kinematic Viscosity at 135°C, cSt ASTMD-2170 Min.250 Min.300 Min.350 Min.400
Flash Point (Cleveland Open Cup,)°C ASTMD-92 Min.220 Min.220 Min.220 Min.220
Solubility in trichloroethylene,% ASTMD-2040 Min.99 Min.99 Min.99 Min.99
Softening Point.(R&B),°C ASTMD-36 Min.40 Min.45 Min.47 Min.50
Penetration @ 25°C, 0.1mm 100gm,5sec. ASTMD-5 80-100 60-80 50-70 40-60
Testson residue from thin film oven tests/RTFOT
I)Viscosity ratio at 60°C ASTMD-2171 Max.4.0 Max.4.0 Max.4.0 Max.4.0
II)Ductility at 25°C,cm,after thin- film oven tests ASTMD-113 Min.75 Min.50 Min.40 Min.25
Specific Gravity @ 27/27°C ASTMD-70 Min.0.99 Min.0.99 Min.0.99 Min.0.99

Bitumen – Emulsion Grades

NOTE 1: If the ductility at 25°C (77°F) is less than 100. the material Still be acceptable if its ductility at 15° (59°F) is more than 100.

Designation MC-3000 MC ~OO MC-250 MC-70 MC-30
Max Min Max Min Max Min Max Min Max Win
Kinematic viscosity at 60°C (140°F), mm2/s 30 60 70 140 250 500 800 1600 3000 6000
Flash point

(Tag open cups), °C (°F)

38 (100) 38 (100) 66 (150) 66 (150) 66 (150)
Distillate test: Distillate, volume percent of total distillate to 360 °C (680 °F):
to 225°C (437°F) 25 20 10
to 260°C (500°F) 40 70 20 60 15 55 35 15
to 316°C (600°F) 75 93 65 90 60 87 45 80 15 75
Residue from distillation to 360°C (680°F), percent Volume by difference 50 55 67 75 80
Tests on residue from distillation:
Viscosity at 60°C (140°F), Pa – SA 300 1200 300 1200 300 1200 300 1200 300 1200
Ductility at 25°C (77°F), cm 100 100 100 100 100
Solubility in trichlomethy Iene. % 99.0 99.0 99.0 99.2 99.0
Water, % 0.2 0.2 0.2 0.2 0.2
Bitumen – Performance Grades
Performance Grade PG 58 PG 64 PG 70
-16 -22 -16 -22 -10 -16
Average 7-day maximum Pavement Design Temperature, °C <58 <64 <70
Minimum Pavement Design Temperature,° CA > -16 > -22 > -16 > -22 > -10 > -16
Original Binder
Flash Point Temp., D92; min °C 230
Viscosity, D4402:B max. 3 Pa-s, Test Temp., °C 135
Dynamic Shear, D7175:C G*/sin5, min. 1.00 kPa 25 mm Plate, 1 mm Gap Test Temp. at 10 rad/s, °C 58 64 70
Rolling Thin Film Oven(Test Method D2872)
Mass Change, max. percent 1
Dynamic Shear, D7175: G*/sin5, min. 2.20 kPa 25 mm Plate, 1 mm Gap Test Temp. at 10 rad/s,°C 58 64 70
Pressure Aging Vessel Residue (Practice D6521)
PAV Aging Temperature, °CD 100 100 100(110)
Dynamic Shear, D7175: G*-sin5, max 5000 kPa 8 mm Plate, 2 mm Gap Test Temp. at 10 rad/s, °C 25 22 28 25 34 31
Creep Stiffness, D6648:E S, max 300 MPa, m-value; min. 0.300 Test Temp at 60 s, °C -6 -12 -6 -12 0 -6
Direct Tension, D6723:E Fwailure Strain, min. 1.0 % Test Temp. at 1.0 mm/min.°C -6 -12 -6 -12 0 -6

Bitumen is classified by the depth to which a standard needle will penetrate under specified test conditions. This “pen” test classification is used to indicate the hardness of bitumen, lower penetration values indicating a harder bitumen, higher values e.g. 160/220 indicate a softer grade.

Standard Viscosity Grade Bitumen (AC-Grades), in which the Viscosity of the standard bitumen (asphalt) is measured at 60 ºC (140 ºF). RTFOT Viscosity Grade Bitumen (AR-Grades), in which the Viscosity of bitumen (asphalt) is measured at 60 °C (140 °F) after the roll on thin film oven test.

Bitumen emulsion is a liquid product in which bitumen is suspended in a finely divided condition in an aqueous medium and stabilized by suitable material. Normally cationic type emulsions are used in India. The bitumen content in the emulsion is around 60% and the remaining is water. When the emulsion is applied on the road it breaks down resulting in release of water and the mix starts to set. The time of setting depends upon the grade of bitumen.

Performance Grade (PG) bitumen is bitumen which is graded based on its performance at different temperatures. The LTPP has given certain algorithm to calculate the temperature of the pavement based on the temperature of the air above. From this, the highest and the lowest temperatures of the pavement is calculated and the bitumen that performs well in that temperature range is selected.

The customer’s desire marking will get printed, or embossed on drums.

150 Kg steel drum specification
Item Value
Packing in 150 ± 3 kg
Sheet grade ST-12
Heigh of drum 83 cm
Diameter of drum 50 ± 0.2 cm
Diameter of lid 10 ± 0.2 cm
Plate thickness(body) 0.6 mm
Plate thickness(top & Bottom) 0.6 mm
Drum Weight 8.3 ± 0.2 kg
180 Kg steel drum specification
Item Value
Packing in 180 ± 3 kg
Sheet grade ST-12
Heigh of drum 98 cm
Diameter of drum 50 ± 0.2 cm
Diameter of lid 10 ± 0.2 cm
Plate thickness(body) 0.6 mm
Plate thickness(top & Bottom) 0.6 mm
Drum Weight 9.3 ± 0.2 kg

Magships Represents one of the Largest bitumen producer in the Middle East

We Represent 1 of the most prominent bitumen producer. Meeting the capacity of 60000MT/ month production covering the global market from South East Asia to Africa. Its core strength in, hi-tech machinery, latest technology, and state-of-the-art equipped laboratory.

Contact Us to get your offer now !

6 + 9 =